Please read all disclaimers carefully before ordering.
Want to make your own Gun4IR LEDs in various cable lengths and LED leg lengths? Now you can!
With this new easy to build DIY LED kit, just solder the 3 Included IR LEDs , add the resistor per PCB, attach a 5v power cable, and you're done!
(Basic Soldering skills required!) Ships from NYC!
Includes:
- 4 Official Gun4IR LED PCBs by Jaybee
- 4 Resistors
- 12 High Powered Black LEDs (Short Leg is Positive, Long Leg is Negative)
- 4 Gel Tape Squares
Not Included:
- 5V Power Wiring
- JST or other connectors
- Its is recommended you splice 4 pairs of wires together to a simple USB plug.
Instructions:
1) Solder the included resistor to the resistor marked spot.
2) Solder your led with the SHORT leg on the resistor / VCC side.
3) Solder your power wires. VCC is the positive , Gnd is negative
4) Connect your power wires to a 5V power source such as a usb cable. DO NOT USE anything higher than 5V!
- The PCBs have everything written directly on it to avoid mistakes, but it is still possible to do damage if you are not cautious or aren't following the guide properly. As such we cannot be held responsible for any damages done to the product or your setup/yourself resulting of misuse,and we won't cover damaged or dead PCBs / LEDs under warranty.